UBIQUITI Networks UniFi Cloud Key Controller

Product Information

The UniFi Network Application and UniFi Protect Applications come pre-installed on the Cloud Key Gen2 Plus. You may choose to restrict the collection or use of your personal information in the following ways:

If power is restored within 10 seconds, the device will return to its previous state. If power is not restored within 10 seconds, the device will safely shutdown. The UniFi Cloud Key Gen2 Plus is an integrated hardware controller and self-contained application server designed to monitor and manage your UniFi network devices and camera surveillance system. It features an eight-core processor with 3 GB RAM, a 1 TB SATA HDD for video storage, and 32 GB eMMC flash storage, and utilizes the latest version of the UniFi Controller with hybrid cloud technology. Congratulations you have successfully setup your Unifi Cloud Key. You should see similar to the below. lots of stats, easy maintenance, remote administration and other benefits I have probably yet to discover. Tool-free hard drive tray allows for easy hard drive upgrades. Install Any 2.5” SATA hard drive in seconds.Some time later it was time to upgrade hardware (mostly due to get 802.11n/5GHz wireless) and I wanted to According to the table above, white just means ‘Factory Defaults’. From a users perspective it would be nice to have Upon initial run, it takes about 30 seconds to start serving the Unifi Controller services. After a week, it’s been very robust, and takes about 1 GB of RAM. We now need to create a new version of unifi.keystore.jks which is what the web interface will use, but using our own certificate instead. For the certificate that you got from your CA you will need the intermediate certificate and the root certificate in PEM form. If you have them in DER form then you can use the following command to convert them. openssl x509 -in intermediate.der -inform DER -out intermediate.crt -outform PEM

Press the Shutdown button to initiate a graceful shutdown (all services will be shut down and the CPU will remain active). After pressing the button, wait until the LED goes off, and then unplug the Cloud Key. I deliberately had no other Unifi devices connected to my network for this post which is why it says

The UniFi Controller management interface will appear. You can manage your UniFi devices and view network statistics using the UniFi Controller management interface. For those who are interested in using their own certificates with the Unifi Cloud Key, head over to Scott Helme’s blog This takes the PKCS #12 file and outputs the unifi.keystore.jks file that we removed earlier. With that in place, you're now ready to start the UniFi service again. service unifi start

setting up the Unifi Cloud Key then you are probably the network administrator and will probably know Switches that are 802.3af/at / PoE compliant can power the cloud key. Simply connect the supplied Ethernet Cable to the generated so you can leave this section as it is if you wish. I am guessing that when devices are adopted they willThe contents of update.sh are the commands you want to execute on the remote host which are here. service unifi stop WARNING: Do not release or operate the HDD Latch while the Cloud Key Gen2 Plus is in use or powered on. Layer-2 networks or not. If you are the network administrator but don’t know if you have multiple Layer-2 networks

I recently wrote about my new Ubiquiti Home Network and so far I can't find a single fault with any of it. There is however one minor niggle that I wanted to do something about, this: I got an RSA certificate for my Cloud Key because I wasn't sure if it was going to support ECDSA keys/ciphers. ECDSA keys are a lot faster, just look at Testing out ECDSA certificates, but in this scenario the benefits are probably not going to be noticed. I also doubt that it would support hybrid certificates but if you feel brave enough to try it out, let me know. Now, rather than delete the file we're going to rename it so we have it around for later, just in case. mv /etc/ssl/private/unifi.keystore.jks /etc/ssl/private/unifi.keystore.jks.old You may to see the Your connection is not private again. As this is a very specific case where it is python acme_tiny.py --account-key account.key --csr unifi.scotthelme.co.uk.csr --acme-dir /home/scott/acme/challenges > signed.crt

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: