Heat vs airflow– which matters most in your biltong box? it’s a question we’re often asked. Airflow will always be the most important thing to consider in your biltong dehydrator- but the answer can get a little complex. Let’s take a look at some of the factors you need to consider. Making biltong the right way Once that is done, take the first hinge, align its screw holes over the indicated marks and add the screws. If you have difficulties getting the screw in, you can use an awl or another pointed tool to puncture the holes first. is about as loud as the sound of a whisper, so deducting a whisper amount from a very loud belt will not stop you from being heard. It's more like the difference between a loud and semi-loud voice.

In some dry climates- indeed, like the highveld area of South Africa the Voortrekkers credited with inventing biltong were crossing- there would be no risk of this moisture gathering at all because the ambient moisture in the air is that low. The top and bottom profiles can now use the right side profile to align it during placing. After placing a profile, add some pressure to make sure it is firmly attached. Once they are in place, take the left panel and mount it on the plastic dowels of the top panel; in this step, make sure you also add the wooden dowels into the foreseen holes of the left panel.Now that we know which components we’ll use, let’s look at the tools we need to create our biltong box. We need a drill and hole saws to make the ventilation and fan holes.

This is the easy part. Simply hook the meat, making sure it doesn’t touch any part of the box. Put the lid on, start the fan and wait. Easy, right? How to tell when it’s done When the tape measure is nicely aligned on our two points, we place a mark every 7 cm or 2.76 inches. These are the four points that will be used to add the dowels to. Everyone lives in different climatic conditions, and these can have an effect on the biltong making process. To make a great piece of biltong, three factors count: Now take the bottom panel and ensure the ledge corresponds to the other panels’ ledge. Next, align the plastic dowels of the bottom panel with the side panels and push the bottom panel down. If you have the option, consider practicing in your car more often. Most people love letting their voices free in their cars and singing to the top of their lungs, even if they don't have the voice for it.Let’s now make sure no insects enter our biltong box. We’ll be adding pieces of mosquito net to the holes; we like to add them on the inside and outside of the box. So cut two round or square pieces per ventilation hole to size, and fire up that glue gun. While it does limit your movements and can cause tension, it is still not the end of the world in some instances, and you can still sing comfortably enough. Does Not Have Different Sizing Continue to do the same with the other sides, keeping in mind that the right side profile needs two sides miter sawed. And the left side profiles none.

Also, drill only halfway through the panel, as we’ll drill the remaining part from the other side. This is to have as least chipped paint as possible.The only thing is, it's the only product of its kind that is out right now, which comes with pros and cons. I love the idea of the product and hope to see other releases that build on what it currently offers.